Medicann, We would need a lot more information to help. Is this your 1st map made? Do you have other maps that run? How is this map different from those other maps?
I see from your dump files that the players are loading in as:
1) Team 1
2) Team 2
3) Team 1
4) Team 2
They should be changed to:
1) Team 1
2) Team 1
3) Team 1
4) Team 1
5) Team 2
6) Team 2
7) Team 2
8) Team 2
A) The alternating sequence may be causing issues. It may not.
B) The long snaking land masses could cause issues when the computer tries to calculate pathing.
Profile of Rosbone
General Information
Register Time: 26 Aug 2017, 18:38 PM
Last Visit Time: 17 Apr 2024, 06:03 AM
Broadcast: https://www.twitch.tv/Rosbone_Mako
Steam: 76561198351782810
Residence: United States
Timezone: America/New_York
Register Time: 26 Aug 2017, 18:38 PM
Last Visit Time: 17 Apr 2024, 06:03 AM
Broadcast: https://www.twitch.tv/Rosbone_Mako
Steam: 76561198351782810
Residence: United States
Timezone: America/New_York
Signature
Post History of Rosbone
Thread: help - need help with map debugging13 Jan 2019, 18:29 PM
|
Thread: vs caesar gg :)10 Jan 2019, 18:23 PM
@Tric This is on Vilshanka. In: Replays |
Thread: Do you like the NEW Angoville?10 Jan 2019, 18:14 PM
Here is a shot of The Narrow for example. At its narrowest width it is around 85 meters. So that is like a 4v4 being played on just the left side of Crossroads. Not all of crossroads. Just one side. This is what the comp stomp community loves. The maps look is the most important thing. Narrow areas is second. How balanced or how well units move thru it is never a concern at all. And cutoffs confuse the bot so dont use them. This was my first COH2 map and it does not look very good. So I only have 10k subs Play against 4 expert Soviet bots and try to hold when 8 to 12 penal squads come straight at you. Or against OST when 222 and flametracks are blobbed at you since the bot gets about 3 times your fuel income. Good luck The most fun map I made was vCOH achelous river necked down to just the middle section. No bridges at all. Flak 88 emplacements premade on one side of the map. Hold out as long as you can. Average score was 250k damage per hour played. Usually lasted 90 minutes. Could be almost infinite depending on the bots choices and how damaged the area got. It eventually becomes impassable in vCOH. So you cannot win. So you need to go USF and make about 6-8 howies then decrew them to regain pop cap. Then spam tanks. Then reman the howies with engrs. Hit like 140 pop cap. gg. On a heavily modified version of Trics original FAILED DROP vCOH map, I had over a million damage in about 5 hours of play. Freaking epic! So you can see why I get bored playing a 1v1. |
Thread: Do you like the NEW Angoville?10 Jan 2019, 17:04 PM
This is something i just understand. I just don't. Can someone explain it to me? Most people want huge head on battles. Usually battles that they win. The Relic AI gets easy to beat unless you set it to EXPERT. And at expert, it cheats a lot by sneaking around your units since it has no FOW. So you never get a good battle. You just chase sneaky little cockroaches all game long. Making a bridge forces them to fight at the bridge. They cant sneak around behind you all day. So you are guaranteed a good fight at least at the bridge. Another option is a long lane, such as a map I made called The Narrow. This map is the best for Comp Stomps because it is a narrow 4v4. Which means you can play it 4v1 if you want. See how long you can hang with 4 expert bots coming at you. It is also best to stack one side of the map with extra muni and fuel so you can play from the easy side or the hard side for more options. |
Thread: Do you like the NEW Angoville?10 Jan 2019, 01:14 AM
i wonder what the most played coh map (1&2) is in total. I am going to guess Achelous River. A well balanced 1v1 map will get like 50 - 200 subs. Maybe 1k if it looks really cool. Someone remakes Achelous and it gets 100k to 300k subs. Making maps for Automatch is a huge waste of time. You have almost no chance of getting it in rotation. Get shit on by everyone in the community. Sounds fun, will do again! Make a city map with a couple bridges = 200K subs. Nothing but praise EDIT: Achelous River The map is busted for USF and still gets 180k downloads and praise out the ass. I know what maps I'm working on from now on. Screw the 60 1v1 players we have left |
Thread: Do you like the NEW Angoville?9 Jan 2019, 21:15 PM
And now...wait for it....wait for it..... <drum roll> 2v2 Angoville NVP Steam Link I know that no one here will care but I thought it would be a funny post |
Thread: Bad audio in stream please give advice8 Jan 2019, 21:34 PM
Sorry if i did not explain well enough. I meant the ingame sounds are way weaker and all treble no bass at all in the stream compared to how they sound on my computer while playing. And i stream at 5000 bitrate. I don't even use a mic. This may depend on your streaming software. 1. The game has a volume control. Turn it all the way up. 2. Windows then has a volume control for the game that can be adjusted. 3. Windows has its OVERALL volume that can be adjusted. 4. Then the streaming software will have a volume control for desktop audio. Make sure that is turned up as well. Any one of those could be off. To me it sounded like you are streaming from a laptop and the laptop mic was picking up the speakers. Maybe do a test where your MIC volume is set to zero in the streaming software. The thin sound could be because the volume was just so low that it was compression/digitization noise. The sound was so quiet there were not enough bits to represent it correctly in the codec. The bit rate of the audio should be minimum 64 kbs. 192 kbs is approx CD quality. You listed 5000 which is most likely the video compression bandwidth or the combination of both. 5000 kbs is normal for HD video. Someone could help better if you state what streaming software you are using. |
Thread: Bad audio in stream please give advice8 Jan 2019, 21:05 PM
I forgot to add that the Yeti and other USB solutions are best because the mic input on most PC sound cards is complete garbage and should never be used. It will be noisy with hiss and usually will make buzzing sounds as you move your mouse. If you have a standalone card you may be OK. But note that most mics are not meant to be used on a PC pinout and will have the wrong connection/cable. A generic mic has low signal voltage output and has to be amplified a lot. Anytime you amplify something, you will be adding noise. Since the PC preamp chips are right on the motherboard that is making all sorts of electrical noise, that noise will get picked up and amplified by the close proximity preamp. This is also why your case is metal. To create a faraday cage that prevents the electrical noise from escaping into the world. And the manufacturers are going to use cheap chips not good chips. For USB solutions, the preamp is no where near the computer motherboard. They are either in the mic itself or in a separate box. And they will use the best chips/solutions they can for the application. So you want a mic that has a USB cord if you want a standalone solution. If you want the ability to expand later you will want a mic with an XLR audio connection that plugs into a USB preamp. This will let you get a mixer/compressor later if you want to. USB MICROPHONE EXAMPLE The sound is converted from mechanical vibrations to digital information inside the microphone. The digital information will not be effected by noise etc. Only a USB cable is used to send the digital info. The mic is also powered from the USB cable. STANDARD MIC EXAMPLE The sound is converted to analog voltages and sent from the mic to the preamp. The preamp converts the analog voltages to digital information. The analog cabling is susceptible to noise and interference. The mic uses a XLR balanced cable that reduces noise pickup. NOTE: Condensor mics need a voltage applied to them to operate. This is called phantom power in the sound industry. And must be turned on at the mixer/preamp or you will get no sound. For most pro mics the voltage is 48 volts. You may see PHANTOM or 48V as the option. I think the standard comes from old phone systems using 48v Hmmmm. Wow this turned into a book |
Thread: Bad audio in stream please give advice8 Jan 2019, 20:17 PM
Getting good audio can be very difficult. Generically you are limited to the quality of microphone you are using. People with good sound have purchased a good microphone such as a Blue Yeti. If you are using your headset microphone the sound will usually be thin (no bass) etc. There are several types of mics. There are also different sound pickup patterns associated with microphones. Electret, Dynamic, and condensor are microphone types. Cardioid and omnidirectional are the two main types of pickup pattern. In the chart zero degrees is the area the microphone is pointed at. As you move off to the side or back the sounds volume will change and possibly be colored (change tone). Cardiod patterns try to reduce unwanted sounds from the sides and back of the mic. Omni picks up sound well from all directions. The best sound for streaming would be a good condensor microphone. It would also be great if you could choose different pickup patterns. This is why the yeti is so popular. You plug it in and you are good to go. Sounds good and has selectable patterns. GG. Headset microphones usually are cheap and thin sounding. And have very directional pickup patterns so your voice volume will change a lot depending on where your mouth is pointed in relation to the mic. Again, a good condensor will be less directional and more towards an omnidirectional pattern. So your volume will not fluctuate as much. Trade off being the more omni it is, the more keyboard and mouse sounds you will be picking up. Next up is setting your volume. You never want to be able to speak into the mic and have the sound be so loud that it distorts (overdrives the amplifier). Like when some RNG plane lands on your whole army and you start screaming that Relic is anal cancer! The screaming will be distorted. You also dont want most of your speaking to be too quiet then destroy the listeners ears when you start screaming. A constant volume is what you are aiming for. So you need to set the volume so that the loudest sound you ever make will not overload/distort. And you need to set it at the first gain stage. On some mics you can set the volume manually right on the mic or its USB cord. On most you need to set it in windows at the recording devices dialog. You will have more volume reducing options later but they will not help you if the sound is already distorted. You need it reduced at the source! The dialog may have a VU meter or volume graph. You will want to make the loudest sound you will normally make and never max out the graph! In this example adjust the volume so you never have all of the green bars lit. You should now be able to use OBS etc. However, you will still find that your volume changes a lot when you speak. The next step is COMPRESSION. Compression automatically monitors your volume and changes it when you are getting too loud. In OBS you can add a FILTER to your mic source. The default settings are decent. I Like to run closer to the example settings above. The important setting is threshold. The compressor does nothing until you are talking loud enough to hit the threshold volume. Then the compressor begins to work and reduces your volume. Ratio is how much will it turn down your volume after you are too loud. 6 to 10 is a good number. Too much and your loud parts become quieter than your soft parts and you get a "pumping" sound. Since the compressor is now turning down your volume to keep you at a constant volume, your overall volume will be low. So you need to adjust the OUTPUT GAIN to bring the overall finished volume back up to the level you want on your stream. Another side effect of the compressor is your noise floor will now be increased by the OUTPUT GAIN value. So if your mic is noisy (lots of hiss and background noise) it will now be even louder. So now you will want to add another filter such as the NOISE GATE or NOISE REDUCER. These filters are the opposite of the compressor. They turn your volume off until you start talking. Then they turn it up. This means less hiss and background when you are not talking. When you pick your final volume you should be aware that sound adds. So if you have your mic at MAX possible volume and then COH2 is making sounds, you will overdrive and distort. So you want your final volume around -3 to -6 dB depending on how loud your other sounds sources are (game, music, etc). The main thing you need is EQ at this point. Most USB mics and headsets will not give you any EQ options. That will give you the ability to boost the bass and try to fix that thin sounding mic. There are several options to you from $30 to $3000. OPTION 1: Low as $30. Cheap headset. Done. OPTION 2: Low as $50. Usually more like $100. Decent USB condensor microphone. OPTION 3: $150 and up. There are some kits you can buy that will have a normal condensor mic and a USB preamp. This gives you slightly better quality of sound and may be useful for sounds external to the PC (guitars, keyboards, Xbox, etc) The Tascam Ministudio is a device dedicated to streaming and are usually around $100. The USB preamps usually offer no EQ capabilities. If they do, the EQ options may reside in a program that you need to run from them. OPTION 4: $500 The big boys. This option gets you to a mixer. You need a normal condensor mic. The mic plugs in to a mixer. The mixer has manual bass and treble controls, additional inputs, VU meters, etc. This gives you the most flexibility. You then will want a standalone compressor/gate. Then a USB preamp. With this setup you should be able to achieve pro level sound. Some companies may have a compressor built into the mixer. Behringer has some offerings as an example. However the compressor has little flexibility and no noise gate options. A seperate mixer/compressor option also has built in headroom so that you are much less likely to ever distort the sound. Next is just good speaking habits. Watching a pro like Stormless you will notice he keeps a good distance from his mic and never changes the volume of his voice. As opposed to AE who is enthusiasctic and screams HOLY MOTHER OF GOD once in a awhile. Stormless never distorts and doesnt even need any compression. AE seriously needs loads of compression. You dont want be so close to the mic that any head movement cause drastic volume changes. You also dont want the mic far from you or it will pick up background sounds and more importantly pick up echoes of sound in your room. Too far away and you may sound like you are in a toilet. To close and your volume will be all over. Physics also dictates some bass boost when you are too close to the mic (proximity effect). You will need to play around with distance to your mouth and also the mic placement and direction. To get the best sound without echo. The echoes will also mix with your voice and cause the sound to be thin because the sounds are out of phase and cancel each other out. So closer is always better until it is not You will also want some form of windscreen for your mic. Your breath across the mic will make nasty sounds so usually a foam covering is used to reduce this sound. Pros have windscreens that attach separate from the mic. Here is an example setup from the web: Also notice that this microphone is being suspended to reduce vibrations. Most condensors will have this type of mic mounting. A Blue Yeti does not, and will pickup vibrations from you touching the desk, typing, clicking, cars going by, etc. You can always fold up a towel and put the yeti on top of it to uncouple the mic from the desk/table you have it setting on. Be creative or spend some cash its up to you. TLDR Get a Yeti. Hopefully some guys will give you some example setups they use and how they set their software. If not I would guess a good condensor mic like a yeti and look to see if they have software that goes with it that may let you do EQ etc. There are a ton of off brand setups on Amazon. Mics and speakers are weird because cost does not always equal good sound. Read lots of user reviews before purchasing. Some $25 chinese knockoff may be all you need or maybe a $500 Rode is what you want. This field is changing daily as manufacturers are balancing giving you what you need and making you pay a lot for the separate pieces. Why give you an all in one solution when they can make you pay for each piece. The Tascam miniStudio is a step in the right direction. The cheap Behringer mixers that have USB and compression are another. They are just not quite there yet. |
Thread: 4v4 Close Game8 Jan 2019, 02:51 AM
Disclaimer: I am not a strategist or even good. Since it is a 4v4 you wont get any good advice I gave the match a quick watch. You seemed to be carrying the team for about half the match. Two guys were slow getting their stuff on the field (AFK). Both right next to you. Most of your plays looked good to me. One problem was your right side mate was an offensive player. These guys blob up and smash into the enemy, do damage, then retreat. So they have a great score but hold zero points all game long. You guys got your side and your game fell apart when you went middle because your mate could not hold the side. On Port of Hamburg south, you have to hold the right side. North has to hold the left side. If you lose your side you get opened to flanks and have few areas to hide your army. And artillery becomes very effective. Also if your front line has not changed much for several minutes expect artillery spam. I think you had a werfer and one guy had an LeFH. The enemy held the left fuel all game and took your fuel when you went mid. So they had fuel for days which means big tanks spam. I don't think you could have done too much differently. Maybe fortify your side more before pushing the middle. 4v4 also means you need commanders with Lefh for side play and elephant for middle play? Several times your blobs got stopped by MGs but you did not put many MGs around your side late game to stop the blobs coming at you. One MG could have slowed them and then a werfer shot to rek them while suppressed may have helped hold the right side late game. Maybe spread your volks out a little so when you hit an MG you dont have to retreat the whole blob. 4v4 randos is hard. Early you stole an MG and popped in the building by the bridge. At this point you probably felt like these guys were noobs and it was won already. Which is sometimes true. But sometimes they are good and just retreated to keep their army and you get rekt when they come back because you didnt respect them enough Also that building has a sight blocker to the enemy side so it does not cover well for you. Good Game In: Replay Reviews |
719709719047719044719029718936718915718814718813718800718675
Latest replays uploaded by Rosbone
Livestreams
1 | |||||
3 |
Ladders Top 10
-
#Steam AliasWL%Streak
- 1.1217498.710+3
- 2.16798.630+7
- 3.456178.719+2
- 4.504406.554+2
- 5.10520.840+3
- 6.186109.631+3
- 7.18372.718+2
- 8.567.889+3
- 9.783384.671+5
- 10.336200.627+3
- 1.2026869.700-1
- 2.403274.595+2
- 3.18693.667-1
- 4.21374.742+1
- 5.639341.652+10
- 6.20373.736+3
- 7.691390.639+3
- 8.353290.549+1
- 9.493259.656+4
- 10.770344.691+3
- 1.1382718.658+1
- 2.445210.679+11
- 3.759443.631+2
- 4.339265.561+8
- 5.476321.597-1
- 6.293187.610+1
- 7.474200.703+22
- 8.1816532.773+2
- 9.184117.611+7
- 10.393188.676+2
- 1.354126.738+6
- 2.342169.669+5
- 3.316127.713+6
- 4.282165.631+1
- 5.232121.657-1
- 6.328135.708+21
- 7.807223.783+19
- 8.922387.704+4
- 9.23451070.687+3
- 10.18061005.642+3
- 1.1340629.681+2
- 2.2532915.735+3
- 3.862236.785+28
- 4.508224.694+9
- 5.489191.719+31
- 6.714389.647+12
- 7.737.913+1
- 8.571350.620+2
- 9.552290.656-1
- 10.540316.631+11
- 1.27301419.658+2
- 2.245122.668-1
- 3.14875.664-1
- 4.12641.754-1
- 5.14940.788+6
- 6.354169.677+3
- 7.407252.618+6
- 8.681361.654+7
- 9.402247.619+2
- 10.1238763.619-2
- 1.656285.697+1
- 2.16193.634+3
- 3.423213.665-1
- 4.20788.702+1
- 5.8627.761-1
- 6.9438.712+4
- 7.16671083.606+5
- 8.360192.652+3
- 9.327155.678+2
- 10.320259.553-1
- 1.239116.673+1
- 2.389309.557+2
- 3.481227.679+2
- 4.535495.519+4
- 5.403266.602+1
- 6.296281.513+3
- 7.241238.503+1
- 8.412288.589+1
- 9.338313.519+4
- 10.140125.528-1
- 1.909310.746+12
- 2.597334.641-1
- 3.419255.622+8
- 4.604195.756+7
- 5.3592806.817-3
- 6.69952632.727+4
- 7.419275.604+3
- 8.347190.646+10
- 9.391265.596+4
- 10.10250.671+6
- 1.1369614.690+5
- 2.2005668.750+6
- 3.15021064.585-2
- 4.634245.721+10
- 5.17870.718+4
- 6.1028640.616+3
- 7.461236.661+3
- 8.935518.643+1
- 9.418117.781+15
- 10.16781198.583+10
- 1.390163.705+5
- 2.683301.694+3
- 3.414132.758+8
- 4.646276.701+3
- 5.1919520.787+1
- 6.291102.740+28
- 7.306128.705-1
- 8.594277.682+3
- 9.407229.640-1
- 10.275168.621+7
- 1.1621791.672+7
- 2.328152.683+6
- 3.31991218.724+3
- 4.639207.755+6
- 5.807408.664+3
- 6.606291.676+2
- 7.1185556.681+6
- 8.539315.631+4
- 9.556207.729+15
- 10.507261.660+7
- 1.843331.718+9
- 2.23476.755+10
- 3.382201.655+1
- 4.1871662.739+5
- 5.315140.692+2
- 6.451138.766+10
- 7.410182.693-1
- 8.34191721.665+2
- 9.209108.659+7
- 10.285116.711+9
- 1.24871403.639+6
- 2.398161.712+1
- 3.446189.702+13
- 4.290147.664+9
- 5.464219.679+2
- 6.310213.593+3
- 7.220108.671+13
- 8.193113.631-1
- 9.9936.733-1
- 10.24961.803+2
- 1.322172.652+8
- 2.1480575.720-1
- 3.2398793.751-1
- 4.16366.712-1
- 5.435161.730-1
- 6.679224.752+4
- 7.382176.685+7
- 8.239172.582+3
- 9.15174.671-1
- 10.7222.766+3
- 1.738662.527+1
- 2.290191.603+4
- 3.421288.594+2
- 4.13859.701-1
- 5.289296.494-3
- 6.150129.538+2
- 7.921786.540-2
- 8.410312.568+4
- 9.15191125.575+7
- 10.19741308.601+6
- 1.968562.633+23
- 2.555227.710+11
- 3.29446.865-1
- 4.276110.715+14
- 5.259143.644+3
- 6.250150.625+11
- 7.22491.711+11
- 8.250135.649+1
- 9.8119.810+1
- 10.13556.707+3
- 1.1560881.639+13
- 2.463229.669+2
- 3.906277.766+7
- 4.1906856.690+15
- 5.299144.675+8
- 6.736592.554+6
- 7.357183.661+3
- 8.287147.661+7
- 9.15049.754+2
- 10.388210.649+10
- 1.878390.692+2
- 2.645251.720+7
- 3.1055437.707-1
- 4.16093.632+2
- 5.315127.713+3
- 6.287124.698+2
- 7.334146.696+8
- 8.35158.858+1
- 9.7231.699+4
- 10.721439.622-1
- 1.480354.576+4
- 2.344258.571+3
- 3.432344.557+1
- 4.203144.585+5
- 5.470372.558+1
- 6.20521867.524-1
- 7.303202.600-2
- 8.975681.589+1
- 9.15261235.553+6
- 10.210150.583+2
Data provided by
Relic Entertainment
Replay highlight
VS
- cblanco ★
- 보드카 중대
- VonManteuffel
- Heartless Jäger
Einhoven Country
Honor it
7
Download
759
uploaded by XXxxHeartlessxxXX
Board Info
559 users are online:
559 guests
2 posts in the last 24h
41 posts in the last week
131 posts in the last month
41 posts in the last week
131 posts in the last month
Registered members: 45094
Welcome our newest member, maleahecortez
Most online: 2043 users on 29 Oct 2023, 01:04 AM
Welcome our newest member, maleahecortez
Most online: 2043 users on 29 Oct 2023, 01:04 AM